Radar Detector GRD 2010
RM650.00
1.Precise radar frequency numerical display
2.Audible speed trap alerts — "beep" and voice
3.Chinese/English bilingual announcement free switch.
4.Super radar detection by high sensitive VCO waveguide
5.Clear digital display of 9 band radar signal strength
6.Band switch- each band alert can be switched on/off separately
7.3 levels of sensitivity selection-medium/high/ultrahigh
8.Urban/highway mode switch to eliminate false alert
9.Convenient pushbutton style power and volume switches
10.Full band detection(X, K, new K, Ku, Ka, new Ka, VG-2, 360°Laser)
11.With CE / FCC approval
Operating frequency
x-band ,10.42~10.62GHz±20MHz
k-band, 23.9~24.3GHz±20MHz
Ka-band, 34.1~35.82GHz±20MHz
Ku-band, 13.32~13.54GHz±20MHz
Laser, 800~1100nm
VG-2 , 11.150±175MHz
specification
Power requirement,
Input: DC12V~15V(From Cigarette Lighter Socket)
Current: 50mA~300mA
Dimensions:115L×73W×35H
Temperature Range Operating -25°C~85°C
Notice
1. Please install the detector properly following the User Manual. A rule must be complied with is in whatever way the detector installed, it mustn’t impair the motorist’s view or increase the risk of an accident.
2.Depending on your car, the power supply of the cigarette lighter socket would be continuous or can be switched on/off by your ignition switch. So before you leaving the car, confirm the status of the detector. Do not leave the detector alone to be longtime running, this may lead to complete consumption of car battery or shorten the life of the detector.
3. Before leaving your car, always remember to conceal your detector in a safe place. To avoid the possibility of break--in theft or distortion of shape due to the heat of longtime exposure in the sun(sometime the temperature in car would be a hundred Celsius or above in Summer)
4. Do not disconnect the detector from PC in the whole process of updating. Or this may result in the instability of system.
5. Use standard 12V DC power supply to the detector. Nothing should cover or overlie the detector while in use.
Volume setting
In working condition, press button M2 for audio volume increase and M3 for decrease. Each press gets the announcement of current mode (urban or highway mode) and the number in display screen indicates the current level--totally 9 levels.
Mode Selection
In working condition, press button M1 to switch between City/highway mode. Voice announces the current selected mode. If highway selected the icon H illuminates otherwise no indications.
NOTE: In city mode, many false alerts will be eliminated. Usually the interference signals come from automatic door opener, bank security system, and other devices which share frequencies with police radar. But remember to get back to highway mode if you are driving in open road.
Sensitivity
In working condition, press button M4 to adjust Radar sensitivity. There are totally 3 levels--medium, high, ultrahigh.
Voice announces when a level is selected and also the name displayed in screen.
Bands switch
In working condition, press and hold button M1 and M4 together for over 5 seconds. Here entering the bands switch menu, We can switch on/off alert of a certain band, press M3 for options and M2 to set values. Each operation has voice announcement as well as visual indication.
Options are X--Band/Ku--Band/K--Band/Ka--Band/Ka1--/Ka2--Band/Laser/Mode and language in sequence.
Press button M4 to quit or no operation for 10 seconds returns to working condition.
Language Setting
The same as the above operation, change the value of the last option until you hear the announcement in your language.
Radar Detector GRD 350
RM600.00
1. Features
1. Chinese/English bilingual announcement free switch.
2. Super radar detection by high sensitive VCO waveguide.
3. Precise Radar frequency display
4. Clear digit display of 9 band Radar signal strength
5. Band switch--each band alert can be switched off/on separately
6. 3 levels of radar sensitivity adjustable--medium/high/ultrahigh
7. Urban/highway mode switch to eliminate false alerts
8. Full band detection(X, K, new K, Ku, Ka, new Ka, 6/8F, VG --2, 360Laser)
9. Push button style power switch design
10. Volume adjustable by pressing keys.
5. Notice
1. Please install the detector properly following the User Manual. A rule must be complied
with is in whatever way the detector installed, it mustn’t impair the motorist’s view or increase
the risk of an accident.
2.Depending on your car, the power supply of the cigarette lighter socket woul
d be continuous or can be switched on/off by your ignition switch. So before you
leaving the car, confirm the status of the detector. Do not
leave the detector alone to be longtime running, this may lead to complete co
nsumption of car battery or shorten the life of the detector.
3. Before leaving your car, always remember to conceal your detector in a safe place. To
avoid the possibility of
break--in theft or distortion of shape due to the heat of longtime exposure in t
he sun(sometime the temperature in car would be a hundred Celsius or above in
Summer)
4. Do not disconnect the detector from PC in the whole process of updating. Or this may
result in the instability of system.
5. Use standard 12V DC power supply to the detector. Nothing should cover or overlie the
detector while in use.
Volume setting
In working condition, press button M2 for audio volume increase and M3 for de
crease. Each press gets the
announcement of current mode (urban or highway mode) and the number in d
isplay screen indicates the current level--totally 9 levels.
Mode Selection
In working condition, press button M1 to switch between City/highway mode. Voi
ce announces the current selected mode. If highway selected the icon H illuminates
otherwise no indications.
NOTE: In city mode, many false alerts will be eliminated. Usually the interference
signals come from automatic door opener, bank security system, and other devices
which share frequencies with police radar. But remember to get back to highway mode if
you are driving in open road.
Sensitivity
In working condition, press button M4 to adjust Radar sensitivity. There are totally
3 levels--medium, high, ultrahigh.
Voice announces when a level is selected and also the name displayed in screen.
Bands switch
In working condition, press and hold button M1 and M4 together for over 5 seconds. Here
entering the bands switch menu, We can switch on/off alert of a certain band, press M3 for
options and M2 to set values. Each operation has voice announcement as well as visual
indication.
Options are X--Band/Ku--Band/K--Band/Ka--Band/Ka1--/Ka2--Band/Laser/Mode and
language in sequence.
Press button M4 to quit or no operation for 10 seconds returns to working condition.
Language Setting
The same as the above operation, change the value of the last option until you hear the announcement in your language.
